Advertisement
Connect hose & wand here
Connect hose to cold water
pressure washer here
Adjust thermostat here
CONNECTING AND USING THE HOTBOX
Read this manual before star ting HotBox
n
Protective eye wear is advised during operation of the HotBox
n
Position HotBox on level surface away from outside influences such as rain, strong
n
winds, open flame, or freezing temperatures
Check that the HotBox thermostat dial is in the "OFF" position.
n
Connect a hose from the pump outlet on the pressure washer to the bottom of the coil on the HotBox.
n
Attach hose with wand to top of coil on the HotBox
n
Install desired water nozzle at the end of wand, making sure it is clear of any obstructions.
n
Star t "Cold Water" pressure washer. Open the trigger gun while firmly gripping the wand
n
assembly. Grasp the grip on the wand with one hand and the trigger gun with the other.
Check for leaks in the system and cycle trigger gun to insure bypass is adjusted
n
correctly. Repair any leaks and correct unloader adjustment if needed.
Turn Thermostat dial to desired setting on HotBox. Check for burner ignition. Do not touch
n
HOT surfaces.
Adjust thermostat to a temperature appropriate for best application. Maximum
n
temperature setting may not be needed to accomplish the task.
WHEN FINISHED USING THE HOTBOX
Turn Thermostat to the "OFF" position
n
Cycle cold water thru coil for a shor t period of time.
n
Turn "Cold Water" pressure washer off
n
Disconnect hoses and wand as necessary.
n
RAMTEQ
®
n
n
Connect Gas Supply here
n
n
Advertisement
