Download Print this page

Ramteq HBV400-04 Operator's Manual

Vertical hotbox - ng/lp fired

Advertisement

Quick Links

Model HBV400-04
Vertical Hotbox - NG/LP fired
R E A D
T H I S
M A N U A L
This manual contains important information for the use and safe operation of
your RAMTEQ
machine. FAILURE TO READ THIS MANUAL AND
®
FOLLOW ITS INSTRUCTIONS PRIOR TO OPERATING OR ATTEMPTING
ANY SERVICE OR MAINTENANCE PROCEDURE COULD RESULT IN
SERIOUS INJURY OR DEATH TO YOU OR OTHER PERSONS; ALSO
DAMAGE TO THE MACHINE OR TO OTHER PROPERTY.
RAMTEQ
®
n
n
n
n

Advertisement

loading

Summary of Contents for Ramteq HBV400-04

  • Page 1 Model HBV400-04 Vertical Hotbox - NG/LP fired R E A D T H I S M A N U A L This manual contains important information for the use and safe operation of your RAMTEQ machine. FAILURE TO READ THIS MANUAL AND ®...
  • Page 2: Included Parts

    Information in this operator’s manual is subject to change without notice. RAMTEQ SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN. This operator’s manual contains information protected by copyright. No part of this operator’s manual may be photocopied or reproduced in any form without prior written consent from RAMTEQ ®...
  • Page 3 Do not permit lime and scale buildup to occur in the heat exchanger coil. Do not permit water to freeze inside this hotbox. Risk of coil and plumbing damage may occur. Keep all personnel clear when using this hotbox. Use only recommended RAMTEQ ® parts when servicing this hotbox. RAMTEQ ®...
  • Page 4 Has the proper gas regulator been installed with proper pressure and volume? _____ Is machine properly vented allowing adequate air flow? _____ Are the propane tanks large enough to prevent freezing? _____ Have gas lines been checked for gas leaks? _____ RAMTEQ ®...
  • Page 5 WHEN FINISHED USING THE HOTBOX Turn Thermostat to the "OFF" position Cycle cold water thru coil for a shor t period of time. Turn "Cold Water" pressure washer off Disconnect hoses and wand as necessary. RAMTEQ ®...
  • Page 6 Burner Not Igniting No fuel Fill fuel tank with proper fuel Burner switch turned off Turn burner switch on Thermostat set too low Reset thermostat Defective flow switch Replace pressure switch High limit temp reached Cool down burner RAMTEQ ®...
  • Page 7 PLUMBING SEE PAGE #9 RAMTEQ ®...
  • Page 8 RAMTEQ ®...
  • Page 9 Tubing, hypalon, 7/8" ID, 1-1/8" OD 2 ft 557-00001-03 Hose clamp, ss, #12 573-00001-01 Thermostat, 194 degree, 100438 540-00004-01 Coupler, sp, 1/2" nptf x 3/8" nptf 574-00001-01 Flow switch, ST-6 552-00004-03 QC plug, sp, 3/8", nptf 518-00004-01 Plug, brs, 3/8" pipe RAMTEQ ®...
  • Page 10 RAMTEQ ®...
  • Page 11: Warranty

    Ramteq Incorporated ("RAMTEQ") warrants that the Product you have purchased from RAMTEQ or from an Authorized RAMTEQ Reseller is free from defects in materials or workmanship under normal use for a period of one (1) year from the date of purchase. This warranty extends only to you, the original Purchaser. It is not transfer- able to anyone who subsequently purchases the Products from you.
  • Page 12 Manufacturers Warranty Period Click on pictures to open manufacturers website. 5 years 5 years 3 years 3 years 3 years 3 years 18 months 18/36 months 1 year Ramteq Pressure Washers 14275 NORTHWEST FREEWAY HOUSTON, TX 77040 PHONE: 713.983.6000 FAX: 713.983.6405 1/13...