Tilt And Swivel Base; Kensington Lock - Philips 191E2SB/00 Service Manual

5.13 Tilt and swivel base

Tilt angle:
Tilt for left and right:
A-B 4.0mm
Black side and cut side
L
Gap between bezel and rear cover
Step between bezel and rear cover
Left, right and top:
"Wobble", "Twist", etc (front to back or side to side)
Whole monitor set shall retain stability within a short time after the applied external force disappears.
20NT, 6secs (Max.) back to stable.

5.14 Kensington Lock

Must meet Kensington_slot.spec "TYE-M0004".
MMD request metal plate in Kensington hole.
5.15 Label
Carton label should follow Philips requirement.
Regulatory label follow Philips requirement.
China RoHS label
Detail document refer to Philips Engineering Reference Book.
5.16 Product dimension / Weight (Refer to Philips approved SHT 191/SHT560)
Unit dimension
Packed unit dimension
Net weight
Gross weight
5.17 Transportation
Transportation standards refer to UAN-D1534/00/01.
5.17.1 Transportation packages
Packaging and wrapping shall be sufficient to protect the product against damage or loss during
shipment from the supplier to the destination specified in the purchase order. All packing materials
are subject to test and evaluation per TPV standard. The cushion material shall be constructed
using EPS material.
-5 + 2/- 0 (forward)
+20 + 0/- 3 (backward)
U
R
D
0.3mm
: 442 (w)*340(H)*191(D)
: 520(w)*352(D)*133(H)
: 3.61
: 4.34
A
1. Visual area
H: L-R
V: U-D
2. Black side on the left and right is
symmetrical, not cut side.
0.4mm
Bottom and corner: 0.5mm
Meridian 2 105
B
0.8~1.0 mm
0.8~1.0 mm