Ethernet Object (F9H) - Anybus CompactCom 40 Network Manual

Host Application Objects
6.3

Ethernet Object (F9h)

Category
Extended
Object Description
This object implements Ethernet features in the host application.
Supported Commands
Object:
Instance:
Object Attributes (Instance #0)
# Name
1 Name
2 Revision
3 Number of instances
4 Highest instance no.
Instance Attributes (Instance #1)
# Name Access
1 MAC Get
Address
8 Network Set
Status
Network Status (Instance #1, Attribute #8)
Bit(s) Name
0 Link
1 (Not used)
2 (Not used)
3 Link port 1
4 Link port 2
5–15 Reserved
®
Anybus CompactCom ™ 40 CC-Link IE Field Network Guide
Get_Attribute
Get_Attribute
Set_Attribute
Access Data Type
Get Array of
CHAR
Get UINT8
Get UINT16
Get UINT16
Data Type Value
Array of MAC ad-
UINT8 dress, 6
bytes
UINT16 N/A
Description
Indicates the current link status.
True: The module has a valid link
False: There is no valid link.
Indicates the current link status for port 1.
True: Link on port 1.
False: No valid link on port 1.
Indicates the current link status for port 2.
True: Link on port 2.
False: No valid link on port 2.
Value
"Ethernet"
02h
0001h
0001h
Comment
If implemented, this attribute must be set during initialization
(in Anybus state SET_UP). If not implementet, the value set
at production will be used.
Information about current network status, see below.
39 (52)
HMSI-27-338 1.2