Alarm Setting - ABB H82351 Series Operating Instructions Manual

8.1.8

Alarm setting

Fig. 20: Alarm setting
■ Press the
■ On the list on the left side, select "Alarm", and then click "Select" to enter the setting
interface.
In the pop-up window, enter the programming password of the alarm (the default is 345678)
■
to enter the settings interface.
On the alarm system setting page,
Click "+" and "-" of the "Exit Delay(s)" to set the delay time for the triggering of the alarm so that
the delay zone can be exited after arming is successful.
Click "+" and "-" of the "Entry Delay(s)" to set the delay time for the triggering of the alarm when
entering the delay zone when it is in an armed state.
Click "+" and "-" of the "Alarm Duration (m)" to set the alarm duration of the alarm.
The password error input lock function of the indoor station can be activated by clicking "Wrong
PWD, Locked". If the password is entered incorrectly three times, the indoor station will be
locked for five minutes. (The system is activated by default)
The tamperproof function of the indoor station can be enabled by checking "Tamperproof". If
enabled, when the indoor station is removed from the wall, it will send an alarm automatically to
the PC guard center. This function will be activated automatically for indoor station arming.
Click "Change Private PWD" to change the private password. This password is used to arm and
disarm, and for the door entry settings of the private OS. (The system default is 123456)
Click "Change Programming PWD" to change the programming password. This password is
used to arm and disarm, set the alarm, restore the factory settings and restore the factory
password. (The system default is 345678)
Click "Change Duress PWD" to change the duress password. This password is a special
disarming password and, at the same time as disarming, will send an alarm to the PC guard
center or guard unit. (The system default is 654321)
Operating Instructions 2TMD041700D0041
function button of the indoor station to open the "Basic setting" interface.
Commissioning
│25