ABB H82351 Series Operating Instructions Manual page 23

Commissioning
Mini outdoor station
Fig. 18: Private OS setting-mini outdoor station
On the private OS setting page,
In the "Device" drop-down list, select the mini outdoor station to be set. When there are multiple
mini outdoor stations, "Copy Card" can be used to copy the current mini outdoor station card
information to another mini outdoor station.
In the "Target ID" drop-down list, select the mini outdoor station to be copied and click "Copy" to
copy the card information.
Click "Card Register" and a "Ready for registration!" prompt window will pop up. At this time,
swipe the card on the mini outdoor station to register the card. Each time card registration is
successful, the mini outdoor station will beep.
Click "Card Delete", and an "Ready for deletion!" prompt window will pop up. At this time, swipe
the card on the mini outdoor station to delete the card. Each time card deletion is successful,
the mini outdoor station will beep.
Click "Card Clear", and an "All cards have been cleared successfully!" prompt window will pop
up. When it is successful, the mini outdoor station will beep.
Press the first push button on the mini outdoor station to withdraw from the card
registration/deletion status. Press the second push button to switch the current
registration/deletion status.
Click "Refresh Unlock Key" to synchronize the unlock function of other indoor stations of the
same household. (If the "Secure Unlock" function is enabled in the engineering settings of the
indoor station, this will need to be refreshed to enable the unlock function of other indoor
stations of the same household)
Time synchronization of the mini outdoor station and this indoor station can be set by clicking
"Time Sync". (Provided that the mini outdoor station can be connected to the PC guard center)
In "Version", the current version number of the mini outdoor station can be seen.
│23
Operating Instructions 2TMD041700D0041