Ecom i.roc x20 Series Manual page 89

To change TCP/IP Settings:
1. Contact your ISP or network administrator to determine your IP
address, subnet mask, and/or default gateway (if needed).
2. Be sure Wi-Fi is powered on.
3. From the i.roc x20 Wireless screen, tap Settings > Network
Adapters tab.
4. In the My network card connects to... dropdown box, tap
either The Internet or Work.
If you are connecting to your ISP at home, tap The Internet. If you
Note:
are connecting to a private network, such as a corporate network at
work, tap Work.
5. In the Tap an adapter to modify settings box, tap ecom i.roc
x20 Wi-Fi Adapter.
6. Tap the IP Address tab.
7. Tap Use specific IP address and enter the requested
information.
8. Tap OK to save your settings.
Changing DNS and WINS Settings
Most Internet Service Providers (ISPs) and private networks now
Note:
use dynamically-assigned IP addresses. You will not need to change
Domain Name System (DNS) and Windows Internet Naming Service
(WINS) settings unless your ISP or private network does not use
dynamically-assigned IP addresses. If you are not sure, check with your
network administrator.
Servers that require an assigned IP address may also require a way to
map computer names to IP addresses. Your ecom i.roc x20 supports
two name resolution options:
DNS
WINS