Software; Troubleshooting; Common Problems - Ecom i.roc x20 Series Manual

If switching output check box is set, it means that switching output is
switched automatically, otherwise switching output is not switched. If
switching output is set, you can select one of the four modes of
switching output from the combo box below. You can also specify the
switching output period from the corresponding numeric up-down
control.

12.4 Software

There will be a "Software" menu for all keyboard emulator topics. The
keyboard emulator is described in one of the following chapters.

Troubleshooting

13
Use the following suggestions to troubleshoot problems with the i.roc
x20 Pocket PC.

13.1 Common Problems

Problem
I cannot see
anything on the
screen
I cannot keep my
battery charged
Solution
Be sure the i.roc x20 Pocket PC is powered on
Reset the device by using the stylus to lightly press
the Reset button
Remove and replace the battery.
Always keep the i.roc x20 Pocket PC connected to
the AC Adapter when you are not using it
In the backlight settings, adjust the bar to a lower
level to conserve more battery power.