Notational Information - Welcat GTX-100 User Manual

Notational Information

"GTX-100" "Terminal"
Access point
WLAN
System Program
System Menu
WebGlider-X browser
WebGlider-X
BluePorter
F Drive
S Drive
Battery pack
Backup battery
Scan key
Local device
Remote device
Default device
Indicates a note you can refer to.
Indicates a caution.
Wireless LAN Terminal, Wireless Hand-held Terminal GTX-100.
The wireless communication interface to allow data to be sent between
the GTX-100 and a PC connected to an Ethernet communicating via
TCP/IP. Please use our recommended equipment based on the
IEEE802.11b/g WLAN standard.
Wireless LAN
The OS stored in the GTX-100.
A function of the system program.
The browser operates as an application of the terminal when web based
system is configured by using "WebGlider-X".
"WebGlider-X" is an integrated middleware package for web applica-
tions (WBG-001W). Please purchase separately if needed.
Utility software for executing file Transfer using Bluetooth communi-
cation between the PC and the terminal. Please purchase separately if
needed.
The storage area for storing application, database, and master files. etc.
The application data downloaded from the host computer will be stored
in F drive.
Used for the storage area to store a temporary file during the applica-
tion is running.
"GTB-1"
The battery to perform a temporary saving the built in clock data and
files when the battery pack is removed or the power becomes short.
Used when scanning a barcode.
Bluetooth device during operation is running. When the GTX-100 is in
operation, "Local device" means the GTX-100.
Bluetooth device to which the local device is connected.
The Bluetooth device setup as default among the registered Remote
device list in the System Menu. In the System Menu always this default
device is connected to.
xx