Barcode - Welcat GTX-100 User Manual

3-16-3 Barcode

Barcode scanning test perform.
In addition, this barcode scanning test is not subject to trigger mode.
1. From the test menu, select "3:Barcode".
Barcode is scanned in a normal scanning mode.
The scanned Barcode, the kind of Barcode, and the digit number are
displayed.
Press and hold the scan key for 1 second to get into the continual
scan mode.
While the scan key is pressed, the laser irradiates, and continues
scanning the barcodes. Release the scan key to return to the ordinary
scan mode.
In addition to the scanned Barcode, the kind of Barcode, and the digit
number, scan success rate is also displayed.
Press the key to convert the character code to display.
・"ASCII" (default)
displayed in ASCII Character code.
・"HEX"
displayed in hexadecimal number. For example 16 digit con-
verted from "5"to"35", "m" to "6D", 1 character is displayed as
16 digit positive 2 characters.
Each time by pressing the
3-16 Test Menu
key, the display switches.
3-91