Graco IronMax V Operation Instruction Manual page 14

Cleanup
8. Remove filters from gun and sprayer, if installed.
Clean and inspect. Install filters.
9. If flushing with water, flush again with storage fluid
(mineral spirits or Pump Armor) to leave a protective
coating to prevent freezing or corrosion. Ensure
entire system (including gun and hose) are com-
pletely flushed.
ti2895a
14
ti21124a
10. Wipe sprayer, hose and gun with a rag soaked in
water or mineral spirits.
ti2783a
332250A