Installing Software - Panasonic FZ-R1 series Operating Instructions Manual

Installing Software

Installing software will return the computer to the default condition. When you
install the software, the flash memory data will be erased.
Back up important data to other media or an external hard disk before installa-
tion.
CAUTION
l Do not delete the Recovery Partition on the flash memory. The disk space in
the partition is not available to store data.
„ To check the Recovery Partition, perform the following methods.
1. Flick from the middle of the Start screen to the top, and then long touch
[This PC] under "Windows System".
2. Touch [Manage] on app bar.
„
Touch [Disk Management].
„ Remove everything and reinstall Windows
Preparation
l Remove all peripherals.
l Connect the AC adaptor and do not remove it until installation is com-
plete.
1 Perform "Remove everything and reinstall Windows".
Display "Charm", and touch
recovery] - [Recovery].
Touch [Get Started] under "Remove everything and reinstall Windows".
Touch [Next].
Select the option.
y Just remove my files
Perform the reinstallation of the Windows in a few moments (Approxi-
mately 20 minutes).
y Fully clean the drive
By fully cleaning, the deleted files can not be recovered easily and
the security level will be increased. The processing time will be longer
(Approximately 140 minutes).
Follow the on-screen instructions.
After the reinstallation, the computer will restart.
l Do not interrupt installation, for example by turning off the computer or
performing other operation.
„ Otherwise installation may become unavailable as Windows may not
start up or the data may be corrupted.
52
- [Change PC settings] - [Update and