Installation Procedure - Edimax EW-7326Ig User Manual

2 Installation Procedure

I. Install the Card
A. Turn off your computer and remove its cover.
B. Insert the PCI card to an available PCI slot firmly.
C. Secure this card to the rear of the computer chassis and put back the cover.
D. Secure the antenna to the antenna connector of the card.
E. Turn on the computer.
II. Install the Driver
Before you proceed with the installation, please notice following descriptions.
Note1: The following installation was operated under Windows XP. (Procedures are similar for
Windows 98SE/Me/2000.)
Note2: If you have installed the Wireless PCI Card driver & utility before, please uninstall the old
version first.
A. Insert the Installation CD to your CD-ROM Drive.
B. Select "Install from a list or specific location (Advanced)" and click "Next".
3