Table of Contents
Advertisement
1. Set the paper-thickness lever (located under the printer cover) to 0 if you are using ordinary
single-sheet paper. Also move the paper release lever to the single-sheet position.
2. Turn on the printer, if necessary.
3. Slide the left edge guide until it locks in place next to the triangle mark on the sheet guide. Then,
adjust the right edge guide to match the width of your paper.
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN
User's Guide
Paper Handling
48
- Quick Links:
- Printing on Continuous Paper
Hide quick links:
Advertisement
Table of Contents
