Setting BPM (BPM)
BPM setting and other operations related to playing sequences can be performed.
1 TAP
Tapping this multiple times to match the beat sets the BPM value to
match that interval.
2 BPM
This is the BPM value set for the project. The BPM when the playing
speed is 0% also becomes this value.
It can be changed by turning the rotary selector.
! Pressing [SHIFT] + turning the rotary selector changes the frac-
tional value.
Setting quantize (QUANTIZE)
The operation of the performance pads and 16-step keys can be set.
1 QUANTIZE
Sets the quantize values for when a performance pad is tapped dur-
ing sequencer playback.
2 PATTERN QUANTIZE
Sets the timing for switching when a pattern is switched.
3 PAD SEQUENCE START
Sets whether or not to play the sequencer when a performance pad
is tapped while the sequencer is stopped.
1
4
3 SWING
The [SWING] value can be set.
4 AUDIO INPUT BPM
The BPM of the sound input to the [INPUT] terminals is automati-
cally analyzed and then displayed.
The BPM measurement range is BPM = 70 to 180.
For some tracks, correct measurement may not be possible. When
the BPM cannot be detected, the previously detected BPM value is
displayed and flashes.
1
2
2
3
3
19
En