Hitron BRG35302 User Manual page 23

8~63 characters, which can be alphabet, number, symbol, even the blank.
WEP：
The WEP is similar to the WPA-PSK. There is the encryption key between the PCs and access
point, too.
There are two encryption lengths for selection: 64 bits and 128 bits.
If encryption strength is set to 64-bit or 128-bit, then only the selected WEP key box will
automatically be populated with key values.
For 64-bit WEP, enter 10 hexadecimal digits (any combination of 0-9, a-f, or A-F).
For 128-bit WEP, enter 26 hexadecimal digits (any combination of 0-9, a-f, or A-F).
No matter 64 bits or 128 bits, you can program four data encryption keys.
You can manually or automatically program the four data encryption keys. These values must be
identical on all PCs and Access Points in your network.
‧ Automatic — enter a word or group of printable characters in the Passphrase box and click
the
values.
(Note: In 64 bits, there will generate four data encryption keys. In 128 bits, it will
generate only one data encryption key. )
‧ Manual — enter 10 hexadecimal digits (any combination of 0-9, a-f, or A-F )Select which of
the four keys will be active.
. The key boxes will be automatically populated with key
23/31
V1.0