Functions Descripition; Repeater Transmitter Enable; Transmitter Hang Time; Time To Courtesy Tone - Hamtronix Elektra 2000 Instruction Manual

Repeater controller
Table of Contents

Advertisement

ELEKTRA 2000
01 – REPEATER TRANSMITTER ENABLE (Default = 1)
This is the master repeater switch. This function must be enabled for normal repeater operation. The
Elektra 2000 will continue to respond to DTMF commands even when the repeater's transmitter is
disabled. This function will automatically be enabled after a reset or power up.
0 Disable
02 – TRANSMITTER HANG TIME (Default = 4)
When not zero, the repeater's transmitter will remain on the air for a selected period of time before the it
drops.
0 Drops Immediately
1 Hang time of 300ms
2 Hang Time of 500ms
Note: This time must be greater than the sum of the time for courtesy tone and it's duration or the
courtesy tone will be missed.
03 – TIMER TO COURTESY TONE (Default = 2)
This function determines the delay after COR is lost until the courtesy tone occurs.
0 Immediately
1 After 100ms
2 After 200ms
Note: This time must be less than the sum of hang time and courtesy tone duration or the courtesy tone
will be missed.
04 – DURATION OF COURTESY TONE (Default = 1)
Determine the duration of courtesy tone.
0 No Courtesy Tone
1 50ms long
2 100ms long
Note: This function only affects the simple courtesy tone (see function 06). The duration of multi
courtesy tones are not controlled by user, they are pre-determined by the firmware.
05 – COURTESY TONE FREQUENCY (Default = 2)
Determine the frequency of courtesy tone.
0 300 Hz
3 600 Hz
1 400 Hz
4 700 Hz
2 500 Hz
5 800 Hz
Note: This function only act for simple courtesy tone (see function 06). The frequency of multi courtesy
tones are not controlled by user, they are pre-determined by the firmware.
06 – COURTESY TONE SELECTION (Default = 0)
Determine the type of courtesy tone. Only the simple tone may have it's frequency and duration modified
(See function 04 and 05 for details).
0 Simple Tone
1 Courtesy Tone Editor (See Function 43)
2 Three Crescent Tones
3 Three Decreasing Tones
4 Fast Tones
FUNCTION DESCRIPTION
1 Enable
3 Hang Time of 1s
4 Hang Time of 1.5s
5 Hang Time of 2s
3 After 300ms
4 After 400ms
5 After 500ms
3 150ms long
4 200ms long
5 250ms long
6 900 Hz
7 1000 Hz
8 1100 Hz
5 Two apart
6 Plim-Plim
7 CW K letter
8 NASA Quantar
9 Five Crescents Tones
6 Hang Time of 3s
7 Hang Time of 5s
8 Hang Time of 7.5s
6 After 600ms
7 After 700ms
8 After 800ms
6 300ms long
7 350ms long
8 400ms long
9 1200 Hz
A 1300 Hz
B 1400 Hz
A Double Sweep Tone
B Four Fast Tones
C Sweep Tone
D Droplet
8
Hamtronix
9 Hang Time of 10s
9 After 900ms
9 450ms long
C 1500 Hz
D 1600 Hz

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents