BNU-LW remote diagnosis function
Configuration
16 Lonworks Gateway
"A"
• After entering the ID and password,
the air condition and ventilation
products currently connected are
displays as shown in the picture.
• "A" part displays the number of air
condition and ventilation products
are currently connected.
"B"
• When you would like to control a
product Select the product –
Set the address – Command
ON/OFF – Select the mode –
Click on check to control the
product.
• When you would like to check the
current status Click on Reload
and you will be able to check the
current indoor unit status in the "B"
part.
• When you would like to change the
IP, click on [Set up Network place]
to change the IP.