Working On The Engine Without Removing The Engine (50 Cc); Removal Of The Inlet Coupling And Valves - Peugeot Motorcycles JetForce 50 cc 2002 Workshop Manual

WORKING ON THE ENGINE WITHOUT REMOVING THE ENGINE
WORKING ON THE ENGINE WITHOUT
REMOVING THE ENGINE (50 cc)

Removal of the inlet coupling and valves

- Remove the transmission cover strip (1 screw)
- Remove the air filter housing (2 screws)
- Disconnect the throttle cable (1) from the
throttle unit
- Disconnect the throttle unit (2)
- Remove the inlet coupling 2 fixing bolts
- Remove the inlet coupling and the throttle
unit (3)
- Remove the clip from the throttle unit
- Remove the inlet coupling
- Remove the valves and paper gasket (4)
Reassembly: Re-assemble in the reverse order
to dismantling
Check: Using the diagnostic tool, check for
fault codes, clear them if necessary
Page : 36