TV-IP743SIC User's Guide
WPS (Wi-Fi Protected Setup)
Enable your WPS pairing on your router by pushing and holding WPS
the WPS pairing is ongoing. Within the pairing period (usually 2
If the WPS pairing setup successful, the camera will reboot (you can see
setup correctly and the camera is ready to access.
pairing session is closed. No successful WPS pairing was done. You can
try the WPS pairing again or try other ways to setup your camera.
* If the System Status light keeps in blue and never turned green, your camera
© Copyright 2014 TRENDnet. All rights reserved.
Mount your camera on the wall
bracket.
The TV-IP743SIC comes with a wall mount bracket and two sets of
Then simple put on your TV-IP743SIC.
Installation
10