Final Fitting; Final Checks; Customer Care - Rangemaster Kitchener 110 Gas User's Manual & Installation Instructions

Check the appliance is electrically safe and gas sound when you have finished.

Final Fitting

Fitting the 2-piece Plinth
Fit the inner plinth to the bottom front of the cooker using
the 4 screws provided (
Fig.7.15
Fit the outer plinth (2 screws, 1 each end) to the inner plinth.
The height of the outer plinth can be adjusted by sliding it up
or down via the slotted hole (
Fitting the 1-piece Plinth
Loosen the 3 screws along the front bottom edge of the
cooker. Hook the central keyhole over the central screw. Twist
and fit each end keyhole over their respective screws. Tighten
the fixing screws (
Fig.7.17

Final Checks

Hotplate Check
Check each burner in turn (refer to the 'Hotplate Burners'
section at the front of the instructions).
Grill Check
Turn on the grill and check that the grill heats up.
Oven Check
Set the clock as described earlier in the instructions, and then
turn on the ovens. Check that the oven burners light and start
to heat up.
Note: The oven light bulb is not included in the guarantee.
Turn off the ovens.

Customer Care

Installer: Please complete your details in this Guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
(Kitchener)
).
).
Fig.7.16
(Professional +)
).
INSTALLATION
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Inner plinth
ArtNo.350-0012 - Securing the plinth
31
Outer plinth
Outer plinth xing screw
Fig.7.15
Fig.7.16
Fig.7.17