Advertisement
Operation Instructions
20
4.3.7
Diagrammatic demonstration of setting parameters for different states
4.3.7.1 Setting knife press
In off-line state, The value of"Press"signifies knife press, press"+"to increase
it, press"-"to lower it. the setting values range is 0~255, namely the knife press can
range within0~800g. When the machine runs, if the knife press is found unsuitable,
press"PAUSE"button, then press"+"or"-"to make press up or down。
4.3.7.2
Cutting speed
In speed setting mode, press"+"or"-"to adjust cutting speed, high speed is
suitable for cutting big characters or image, while low speed is suitable for exquisite
small character or image. 10-shift speed is available for your choice:
When cutting at high speed, curve may look zigzag, but it is not a trouble, lowering the
speed will eliminate the indention。
4.3.7.3 Interface for setting X-axis, Y-axis
To minimize the error in mechanic size, set ratio of"X, Y"to be adjustable, and
make composing size conformed to plotting size。
When real size of shaft"X"or"Y"exceeds composing size。
PROCUT CR SERIES USER'S MANUAL
1 → 2 → 3→ 4→ 5 → 6 → 7→ 8→ 9
Advertisement
