Advertisement
Operation Instructions
16
4.3 Operating instructions
4.3.1 On-line / off-line
When the cutter starts reset, it becomes in online state. Press ON LINE to
switch between online and off-line state. When computer transmits information to
the cutting plotter, the cutting plotter must be in online state. However, when setting
parameters for the machine or operating it by hand, you should set it in off-line state.
The LCD will display the following information.
4.3.2 Moving knife top
While in off-line state, press "
When pressing "
step value of " X, Y" in the LCD will change accordingly
4.3.3 Setting origin of plotting
When move the knife top to the starting position, press the origin setting button
"ORIGIN",the values of"X, Y" will be set as 0 , the setting of new origin is
completed. The machine will start plotting from the new origin. To save the present
origin please refer to chapter" saving and using relative origin".
PROCUT CR SERIES USER'S MANUAL
" buttons to move the slider leftward or rightward
" buttons the main shaft will rotate forward or backward, and the
Advertisement
