Table of Contents
Advertisement
CDMA WLL User's Manual
using the Smart Card interface standard ISO/IEC 7816. R-UIM Specification is TIA/EIA/IS-820 and R-UIM
Addendum1 is TIA/EIA/IS-820-1.
7.6.2 Card connect
1. open the battery & UIM cover under the phone case
2. connect the UIM card as blew
3. put the cover back on after phone connection test
(Before Connect)
NOTE : Turn off the phone whenever you insert or remove UIM card.
7.7 IP Function
IP(Internet Phone) function is used to only China.
1. Press <Menu>, <7> and <7(IP)> in sequence.
2. Press <*(▲)> or <#(▼)> to select <1. Enable/Disable)>
If you selected disable, you can't use IP function. And If you selected Enable, you can use
IP function.
3. Press <*(▲)> or <#(▼)> to select IP Number, <2. IP No. setup)>
4. Press IP No.(Example 17911 etc.,)
5. Press <Store>
(After Connect)
39
HTP-800/1900/810
Advertisement
Table of Contents
