HANTEL HTP-800 User Manual page 37

CDMA WLL User's Manual
7.4.7 Erasing the Selected Message
1. Press <Message> <1> or <2>.
2. Press <*(▲)> or <#(▼)> to select the message you want to erase.
3. Press <Store>. The message will display.
4. Press <Store> once more.
5. Press <Store> again to erase the message.
Press <Clear> to cancel erasing.
ERASE THIS MSG?
▶ ERASE CANCEL
7.4.8 Clearing All Received Messages
1. Press <Message>, <4> in sequence.
2. Press <*(▲)> or <#(▼)> to select 'ERASE/CANCEL'
3. Press <Store>.
ERASE ALL
ERASE ▶CANCEL
7.4.9 Setting Message Lock
1. Press <Message>, <5> and <1> in sequence.
2. Press <*(▲)> or <#(▼)> to select 'SET/RELEASE'
3. Press <Store>.
If you set message lock, the phone will ask Lock Code whenever you press <Message>
button.
NOTE : The lock code is preset to '0000' at the factory.
MESSAGE LOCK
▶SET RELEASE
7.4.10 Setting Message Alert
1. Press <Message>, <5> and <2> in sequence.
2. Press <*(▲)> or <#(▼)> to select 'SET/RELEASE'.
3. Press <Store>.
MESSAGE ALERT
▶SET RELEASE
37
HTP-800/1900/810