Do you have a question about the HTP-800 and is the answer not in the manual?
Questions and answers
Summary of Contents for HANTEL HTP-800
Page 1
CDMA WLL User’s Manual HTP-800/1900/810 CDMA-2000 Wireless Local Loop Phone ’ ’ ’ V3.0 Notice : This manual has been being made before user interface is completed. Therefore it could have the necessary of modification and deletion of some of menu items.
CDMA WLL User’s Manual HTP-800/1900/810 CONTENTS Highlights 1. Important Information 1.1 Safety Precautions 1.2 Care and Service 2. Introduction 2.1 Checking the parts 2.2 Setting up your phone 2.3 Getting to know your phone 3. Basic Functions 3.1 Making Calls 3.2 Redial...
Page 3
CDMA WLL User’s Manual HTP-800/1900/810 5.6 Sending your phone number 5.7 Selecting time Mode 5.8 Setting the Alarm 5.9 Checking and Clearing Call Times 5.10 Setting Warning Beeps 6. Advanced Functions 6.1 Changing greeting Message 6.2 System Reset 6.3 Restricting use of the phone 6.4 Locking the phone...
Page 4
CDMA WLL User’s Manual HTP-800/1900/810 Highlights Congratulations on your purchase of the HTP-800/1900/810 Fixed Wireless Telephone. This telephone has been designed to operate on the latest digital mobile communications technology. This technology has greatly enhanced voice clarity and can provide various advanced features.
CDMA WLL User’s Manual HTP-800/1900/810 1. Important Information 1.1 SAFETY PRECAUTIONS Do not operate your product when holding the antenna, or when someone is within four ■ inches (ten centimeters) of the antenna. Holding the antenna affects call quality and may cause the telephone to operate at a higher power level than needed.
CDMA WLL User’s Manual HTP-800/1900/810 Avoid shock or impact. ■ We recommend you to charge the backup battery before initial use. Backup battery may ■ be discharged during delivery. 1.2 Care and Service Unplug the telephone from the wall outlet and remove antenna (or disconnect antenna ■...
CDMA WLL User’s Manual HTP-800/1900/810 2.2 Setting up your phone 2.2.1 Installing the phone This phone operates by receiving D.C. power, which is connected to electrical outlet. The phone is equipped with a rechargeable external battery to back up power failure.
Page 8
CDMA WLL User’s Manual HTP-800/1900/810 2.2.2 Service status check Display in service area When the power cord is connected properly. All segments in the LCD window will turn on briefly. When the RSSI at the top LCD of the phone is on, service is available.
Page 9
CDMA WLL User’s Manual HTP-800/1900/810 Display in area with no service When there is no service in your area, the signal icon does not appear in the display. In this case, contact your service provider. 019-240-2897 2.2.3 Installing the battery 2.2.4 Installing the Wall Bracket...
CDMA WLL User’s Manual HTP-800/1900/810 2.3 Getting to know your phone 2.3.1 Feature...
Page 11
CDMA WLL User’s Manual HTP-800/1900/810 2.3.2 LCD Display Icon The LCD shows icons on the top of the LCD screen. Different indicator appears based on the phone's operating mode. Icons display on the screen to indicate what features you are using and the status of the phone,...
CDMA WLL User’s Manual HTP-800/1900/810 3. Basic Functions 3.1 Making Calls 1. First, check to see that your WLL Phone is turned on. If the LCD is lit, the power is on. 2. Pick up the handset or press <...
CDMA WLL User’s Manual HTP-800/1900/810 3.2 Redial Redial the last number you dialed by using this feature. 1. Pick up the handset, or press < >. 2. Press <RECALL> To speak to the other person, pick up the handset. Calling…...
CDMA WLL User’s Manual HTP-800/1900/810 3.3.1 Caller ID Display The Caller ID feature displays the caller’s number when the phone rings. If the caller’s name and number are stored together in your phone’s memory, the caller’s name will display. Contact your service provider to activate this feature.
CDMA WLL User’s Manual HTP-800/1900/810 3.5 Choosing the ring tone You can choose from ten different ring tones. 1. Press <Menu> and <2(Ring)> to select ‘Ring’. 2. Press <3(Ring Tone)> to select ‘Ring Tone’. RING TONE 3. Press <*(▲)> or <#(▼)> to scan tones.
CDMA WLL User’s Manual HTP-800/1900/810 1. Press < >. You will here the dial tone through the speaker. Dial tone time : 20sec 2. Enter the phone number you want to call. 3. When you hear the other party answer, begin the conversation.
Page 17
CDMA WLL User’s Manual HTP-800/1900/810 Alarm Selects alarm sound(Monotone Alarm Tone Tone 1~6/Melody 1~4) Sets/ Release an alarm([One Time | Daily] 4: Alarm Set/Release Set time Select Alarm Duration[minu- tes] Confirm Tone) 1: Last Call Display the time of last call mad...
CDMA WLL User’s Manual HTP-800/1900/810 Reset Returns phone factory Phone setting(Reset/Cancel) 6: Privacy Protect illegal wiretapping(standard/Enhanced) 7: IP 1. Enable/Disable Used to check your IP function number 2. IP No. setup The lock code is preset to 0000 at the factory.
CDMA WLL User’s Manual HTP-800/1900/810 4.2 Storing numbers in Memory 1. Press < >. 2. Enter the desired telephone number up to 28. 3. Press <Store>. 4. Enter a name by pressing the alphanumeric keys. Note : If you do not wish to enter a name, just skip over this step. You can only input 16 letters.
Page 20
CDMA WLL User’s Manual HTP-800/1900/810 Note : If the location is empty, ‘Empty Location!’ will displays. 4. When the desired number displays. To make the call, press <Recall>. To exit the function, press <Clear>. LOOK UP 01 Empty Location [SEARCH] ◀▶...
CDMA WLL User’s Manual HTP-800/1900/810 4.4.4 Searching Confidential Number To see the phone number stored in a confidential memory location, follow these steps : 1. Press <Menu> and <6(Address Book)> and <1(Search)> in order. 2. Search the one who you want to look by a searching method said previously and The name (if any) displays.
CDMA WLL User’s Manual HTP-800/1900/810 4.5 One-Touch Calling Memory locations 01~09 are special one-touch dialing locations. You can dial the numbers stored in 01~09 by pressing one key. You do not need to precede the numbers with a zero when using one-touch dialing.
CDMA WLL User’s Manual HTP-800/1900/810 5.1.1 Redialing Outgoing Calls 1. Pick up the handset or press < >. 2. Press <Recall> to redial the last call record, “MEMORY EMPTY” will appear with an alarm. 3. To display the phone numbers of the last 10 outgoing calls, press <Menu>, <4(Logs)>, <4(Outgoing)>...
CDMA WLL User’s Manual HTP-800/1900/810 This function is used for a computer service, pager, or home automation provided by a bank or a stock company. If ‘SILENT KEY’ is set, electronic dialing is not available. 5.2.1 Entering a Hard Pause You can enter a hard pause between numbers by Pressing <Menu>...
CDMA WLL User’s Manual HTP-800/1900/810 1. Press <Menu>. 2. Press <7(Security)> to select ‘Security’. 3. Enter the lock code. Note : The lock code is preset to ‘0000’ at the factory. 4. Press <4(My Phone #)> to select ‘My Phone#’...
CDMA WLL User’s Manual HTP-800/1900/810 conversation. TIME 01:28 019-240-2897 5.5.2 Turning on the Key tone 1. Press <Menu> 2. Press <4> to select ‘Scratchpad’. The message ‘Scratchpad’ disappears and the key tone sounds NOTE : If you do not turn on the key tone, you cannot use ARS(Automatic Response System) service or Call pager.
CDMA WLL User’s Manual HTP-800/1900/810 No Time and Date. : Not display time and date. 3. Press <Store>. DATE TIME ▶ AM/PM Type 5.8 Setting the Alarm You can set the alarm sound daily or one time only. 1. Press <Menu>, <3(Time >, <2(Alarm)> and in sequence.
CDMA WLL User’s Manual HTP-800/1900/810 Checking Clearing Call 5.9.1 Checking the Last Call Time Call Time 00Year 1. Press <Menu>, <4(Logs >, <1(Last Call)> in sequence. 000day 00:01:34 2. Press <Clear> to clear the display. 5.9.2 Checking Accumulated Air Time 1.
CDMA WLL User’s Manual HTP-800/1900/810 6. Advanced Functions 6.1 Changing greeting Message This feature lets you change the greeting message that displays when you turn on the phone. 1. Press <Menu> 2. Press <5(Feature)> ‘Feature’. 3. Enter the lock Code Note : The lock code is preset to ‘0000’.
CDMA WLL User’s Manual HTP-800/1900/810 6.3 Restricting use of the phone You can restrict the use of the phone by unauthorized persons. There are 4 restriction modes you can choose as follows. 6.3.1 Restricting Outgoing Calls In this mode, the phone cannot originate a call. If you try to call, ‘OUTGOING CALL RESTRICTED’...
CDMA WLL User’s Manual HTP-800/1900/810 3. Enter your lock code. NOTE : The lock code is preset to ‘0000’ at the factory. 4. Press <2(Restrict)> to select ‘Restrict’. 5. Select the desired menu by pressing the number. ① Outgoing ② Incoming ③...
CDMA WLL User’s Manual HTP-800/1900/810 NOTE: The lock code is preset to ‘0000’ at the factory. 4. Press <3(Auto Lock)> to select ‘SET LOCK ‘, and you can set the desired lock state. Choice “Never, On power up, Now Aways.”...
CDMA WLL User’s Manual HTP-800/1900/810 6.6 Authentication Function The Authentication Key function prevents the owner’s phone number from being cloned by others. The phone has its own authentication key function. This will prohibit any illegal use of the phone. Your service provider will need to register your phone using this authentication function.
CDMA WLL User’s Manual HTP-800/1900/810 7.2 Call Waiting Call Waiting alerts you to a second incoming call while you are on the phone. To respond to a call waiting, press <Recall> or the hooks switch. Contact your service provider to activate Call Waiting.
Page 35
CDMA WLL User’s Manual HTP-800/1900/810 CALL BACK NUMBER SMS PRIORITY IS MESSAGE SEND 019-240-2897 ▶ NORMAL SENDING 7.4.2 Receiving Voice Message 1. If a voice message is received, ‘—VOICE MAIL—‘ and < > will display. 2. Press <Recall> to connect voice mail center and hear the message.
Page 36
CDMA WLL User’s Manual HTP-800/1900/810 1. If a page message is received, PHONE NUMBER and, < > will display. 2. Press <Recall> to call back or <Store> to erase Page message. Note : If the phone number is stored in the phone book with a name, the name will display instead of the phone number.
Page 37
CDMA WLL User’s Manual HTP-800/1900/810 7.4.7 Erasing the Selected Message 1. Press <Message> <1> or <2>. 2. Press <*(▲)> or <#(▼)> to select the message you want to erase. 3. Press <Store>. The message will display. 4. Press <Store> once more.
Service to receive a facsimile to PC or when communicating to PC. 7.5.1 Definition HTP-800/1900/810 provides Data and Fax service. It is capable of transmitting and receiving Data or Facsimile information through a wireless path by being connected to a Notebook (or Desktop PC).
Page 39
CDMA WLL User’s Manual HTP-800/1900/810 using the Smart Card interface standard ISO/IEC 7816. R-UIM Specification is TIA/EIA/IS-820 and R-UIM Addendum1 is TIA/EIA/IS-820-1. 7.6.2 Card connect 1. open the battery & UIM cover under the phone case 2. connect the UIM card as blew 3.
CDMA WLL User’s Manual HTP-800/1900/810 8. Troubleshooting 8.1 Troubleshooting Problems What To Do - Check and see if the power supply is connected No display of the phone at all. properly and in a good manner. - Check if Battery switch is turned on.
Safety Information SAFETY INFORMATION FOR FIXED WIRELESS TERMINALS .POTE NTIALLY EXPLOSIVE ATMOSPHERES Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions.Sparks in such areas could caus e an explosion or fire resulting in bodily injury or even death.
Page 42
SAR INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT ’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver.It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)energy set by the Federal Communications Commission of the U.S.Government.These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.The guidelines are based on standards that were developed by independent...
Page 43
FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received. Including interference that may cause undesired operation. Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Need help?
Do you have a question about the HTP-800 and is the answer not in the manual?
Questions and answers