Listening To Fm Radio; Presetting Stations Manually; Presetting Stations Automatically; Manual Tuning - Panasonic SC-HC400 Owner's Manual

Listening to FM radio

You can preset up to 30 FM channels.
Channel 1 to 5 will be set as the favorite stations under
(FAVOURITE) [1] to [5]. (l right, "Changing the
stations stored under (FAVOURITE) [1] to [5]")
Preparation
≥ Make sure that the antenna is connected. (l 6)
≥ Turn the unit on.
≥ Press [RADIO, EXT-IN] repeatedly to select "FM".

Presetting stations automatically

1
Press [RADIO MENU] to select "A.PRESET".
2
Press [2, 1] to select "LOWEST" or "CURRENT"
and then press [OK].
LOWEST:
To begin auto preset with the lowest frequency
("FM 87.9" or "FM 87.5").
CURRENT:
To begin auto preset with the current frequency.*
≥ The tuner starts to preset all the stations it can receive
into the channels in ascending order.
*1: To change the frequency, refer to "Manual tuning".
Listening to a preset channel
Press the numeric buttons, [:] or [9] to select
the preset station.
≥ Alternatively, press [:/6] or [5/9] on this unit
when "PRESET" is selected as the tune mode*
≥ You can select channel 1 to 5 by pressing one of
(FAVOURITE) [1] to [5] on this unit.

∫ Manual tuning

Press [6] or [5] to tune in to the station.
≥ Alternatively, press [:/6] or [5/9] on this unit
when "MANUAL" is selected as the tune mode*
To tune automatically, press and hold the button until the
frequency starts changing quickly.
*2: To change the tune mode
1 Press [RADIO MENU] repeatedly to select "TUNE
MODE".
2 Press [2, 1] to select "MANUAL" or "PRESET", and
then press [OK].

Presetting stations manually

1
While listening to the radio broadcast
Press [PROGRAM].
2
Press the numeric buttons to select a preset
number.
≥ Do steps 1 through 2 again to preset more stations.

≥ A station previously stored is overwritten when another
station is stored in the same channel preset.
Changing the stations stored under
(FAVOURITE) [1] to [5]
You can change the stations stored under
(FAVOURITE) [1] to [5] easily.
While listening to the radio broadcast
Press and hold one of [1] to [5] until "P " appears on
the display.
1
(" " stands for a number.)

≥ When you change the stations stored under (FAVOURITE)
[1] to [5], channel 1 to 5 are also changed to the same
corresponding stations.
∫ To display the current FM signal status
Press [DISPLAY].
"FM ST":
.
2
"FM - - - -":
"FM MONO": You have set the "FM MODE" to
.
2

≥ "STEREO" is displayed when this unit tunes to a stereo
broadcast.
FM stereo broadcast is being received.
No broadcast is received or FM
broadcast received is weak or in
monaural.
"MONO". (l 14, "If noise is excessive
during FM reception.")
11
TQBJ2049