Listening To Fm Radio - Panasonic SC-ALL7CD Operating Instructions Manual

Listening to FM radio

You can preset up to 30 channels.
Channel 1 to 5 will be set as the favourite stations
under (FAVOURITE) [1] to [5]. (l right, "Changing the
stations stored under (FAVOURITE) [1] to [5]")
Preparation
≥ Make sure that the antenna is connected. (l 5)
≥ Turn the unit on.
≥ Press [RADIO, EXT-IN] repeatedly to select "FM".
Presetting stations automatically
1
Press [PLAY MENU] to select "A.Preset".
2
Press [2, 1] to select "Lowest" or "Current" and
then press [OK].
Lowest:
To begin auto preset with the lowest frequency
("FM 87.50").
Current:
To begin auto preset with the current frequency.*
≥ The tuner starts to preset all the stations it can receive
into the channels in ascending order.
*1: To change the frequency, refer to "Manual tuning".
Listening to a preset channel
Press the numeric buttons, [:] or [9] to select
the preset station.
≥ Alternatively, press [:/6] or [5/9] on this unit
when "Preset" is selected as the tune mode*
≥ You can select channel 1 to 5 by touching one of
(FAVOURITE) [1] to [5] on this unit.
∫ Manual tuning
Press [6] or [5] to tune in to the station.
≥ Alternatively, press [:/6] or [5/9] on this unit
when "Manual" is selected as the tune mode*
To tune automatically, press and hold the button until the
frequency starts changing quickly.
*2: To change the tune mode
1 Press [PLAY MENU] repeatedly to select "Tune Mode".
2 Press [2, 1] to select "Manual" or "Preset", and then
press [OK].
Presetting stations manually
1
While listening to the radio broadcast
Press [PGM, sDEL].
2
Press the numeric buttons to select a preset
number.
≥ Do steps 1 through 2 again to preset more stations.
≥ A station previously stored is overwritten when another
station is stored in the same channel preset.
Changing the stations stored under
(FAVOURITE) [1] to [5]
You can change the stations stored under
(FAVOURITE) [1] to [5] easily.
While listening to the radio broadcast
Press and hold one of [1] to [5] until "P " appears on
the display.
1
(" " stands for a number.)
≥ When you change the stations stored under (FAVOURITE)
[1] to [5], channel 1 to 5 are also changed to the same
corresponding stations.
∫ To display the current FM signal status
For Continental Europe:
Press [DISPLAY] repeatedly to select "FM Status".
2 .
For others:
Press [DISPLAY].
"FM ST":
"FM - - - -":
.
2
"FM Mono":
≥ "Stereo" is displayed when this unit tunes to a stereo
broadcast.
∫ To display RDS text data
(For Continental Europe only)
This system can show the text data transmitted by the
radio data system (RDS) available in some areas.
Press [DISPLAY] repeatedly.
"PS":
"PTY":
"Freq": Frequency
≥ RDS is available only when stereo works in reception.
≥ RDS may not be available if reception is poor.
FM stereo broadcast is being received.
No broadcast is received or FM
broadcast received is weak or in
monaural.
You have set the "FM Mode" to "Mono".
(l 27, "If noise is excessive during FM
reception.")
Programme service
Programme type
17
RQT0A83