Lenovo ThinkPad E570 User Manual page 72

Descriptions: Select the boot device when the system wakes from LAN. If Wake On LAN is enabled, the
network administrator can turn on all of the computers in a LAN remotely through network management
software.
• UEFI/Legacy Boot
Values: Both, UEFI Only, Legacy Only
Descriptions: Define the system boot capability.
– UEFI/Legacy Boot Priority
Values: Legacy First, UEFI First
Descriptions: Select the boot priority between UEFI and Legacy.
– CSM Support (for UEFI Only)
Values: Yes, No
Compatibility Support Module (CSM) is required for starting the legacy operating system. If you
select UEFI Only, CSM Support is selectable. For Both or Legacy Only mode, CSM Support is not
selectable.
Note: If you select UEFI Only, the computer cannot start from the bootable devices that do not have
the UEFI-enabled operating system.
• Boot Mode
Values: Quick, Diagnostics
Descriptions: Define which screen is displayed during the POST, the logo screen or the text message
screen.
• Option Key Display
Values: Disabled, Enabled
Descriptions: If you disable this option, the "To interrupt normal startup, press Enter." message will not be
displayed during the POST.
• Boot Device List F12 Option
Values: Disabled, Enabled
Descriptions: If you enable this option, you can open the Boot Menu window by continuously pressing
F12 when the computer is powered on.
• Boot Order Lock
Values: Disabled, Enabled
Descriptions: Enable this option to lock the boot device priority order.
Restart menu
Note: The BIOS menu items might change without notice. Depending on the model, the default value
might vary.
• Exit Saving Changes
Descriptions: Save the changes and restart the computer.
• Exit Discarding Changes
Descriptions: Discard the changes and restart the computer.
• Load Setup Defaults
Descriptions: Restore to the factory default settings.
56
ThinkPad E570, E570c, and E575 User Guide