Cruise Control - Subaru IMPREZA 2012 Quick Reference Manual

K
Vehicle Dynamics Control OFF switch
L
Cruise control
3
1
2
5
To deactivate Vehicle Dynamics Control, push switch.
light on the combination meter illuminates.
Deactivation should not be used except when absolutely necessary.
Please refer to Owner's Manual for details on when Vehicle Dynamics
Control should be deactivated.
Cruise control enables you to maintain a constant vehicle speed
without holding your foot on the accelerator pedal and it is operative
when the vehicle speed is 40 km/h (25 mph) or more.
1
To activate: Press the CRUISE main switch.
4
2
To set speed: Press the RES/SET switch to the SET side at
desired speed and release it.
3
To increase the speed:
-­ Press the RES/SET switch to the RES side and hold it, release at
desired speed.
-­ Depress accelerator pedal, and press the RES/SET switch to the
SET side at desired speed.
-­ For incremental acceleration, press the RES/SET switch to the
RES side quickly, each tap equals an increase of 1 km/h (0.6 mph).
4
To decrease the speed:
-­ Press the RES/SET switch to the SET side and hold it, release at
desired speed.
-­ Depress brake pedal, and press the RES/SET switch to the SET
side at desired speed.
-­ For incremental deceleration, press the RES/SET switch to the
SET side quickly, each tap equals a decrease of 1 km/h (0.6 mph).
5
To temporarily cancel: Press CANCEL button or depress brake
pedal, clutch pedal (MT). Return to preset speed after it has been
cancelled: RES/SET switch to the RES side.
6
To deactivate: Pushthe CRUISE main switch. Cruise control
is always deactivated when the ignition switch is turned to ACC
or LOCK.
IMPREZA
5