D
Headlights / Turn signal
3
1
2
3
Even if the ignition key is removed from the ignition switch, the lights can be illuminated by turning the
light control switch position from (off) to
To prevent the battery from discharging, make sure that the light control switch is turned to (off) before
leaving the vehicle.
E
Fog lights (if equipped)
F
Windshield wiper and washer
2
G
Rear window wiper and washer (5-door)
Washer: Rotate knob to
1
Headlights
To turn on, rotate knob to the following position:
AUTO (if equipped): Headlights and the lights mentioned
: The headlights are all off.
2
High/low beam change
To change to high beam, push lever forward.
To return, pull back to original position.
3
Turn signal
Move lever up or down.
To turn on, rotate dial to
Fog lights operate only when headlight switch is in:
-
- AUTO position and the headlights are on.
1
1
Wiper
To operate, push lever down/up to the following positions:
: Mist (for a single wipe)
: Off
: Low speed
: High speed
3
2
Intermittent interval
To change interval speed, turn dial.
3
Washer
To wash the windshield, pull the wiper control lever toward you.
Wiper
To operate, rotate knob to the
following positions:
: Washer
(accompanied by wiper operation)
: Continuous
: Intermittent
: Off
: Washer
(accompanied by wiper operation)
. The washer and wiper operate until you release the knob.
: Parking lights, Instrument panel illumination, tail lights,
front side marker lights and license plate lights are on.
: Headlights are on.
above are automatically ON/OFF.
or
.
position.
: Intermittent
In the intermittent position, when
you move the select lever to the R
position (CVT) or the shift lever to the
reverse position (MT), the rear wiper
will switch to continuous operation.
When you move the select lever/shift
lever from the R position to another
position, the rear wiper will return to
intermittent operation.
IMPREZA
.
3