Advertisement
General Safety Information
WARNING
• Be careful not to let the cuffs of your clothes get caught in the chain
while riding, otherwise you may fall off the bicycle.
• Obtain and read the service instructions carefully prior to installing
the parts. Loose, worn or damaged parts may cause the bicycle to fall
over and serious injury may occur as a result. We strongly recommend
only using genuine Shimano replacement parts.
• Obtain and read the service instructions carefully prior to installing
the parts. If adjustments are not carried out correctly, the chain may
come off and this may cause you to fall off the bicycle which could result
in serious injury.
• Read these Technical Service Instructions carefully, and keep them in a
safe place for later reference.
Note
• If gear shifting operations do not feel smooth, wash the derailleur and
lubricate all moving parts.
• If the amount of looseness in the links is so great that adjustment is not
possible, you should replace the derailleur.
• Shimano does not provide the bottom bracket mount fixing bolts.
• For smooth operation, use the specified outer casing and the bottom
bracket cable guide.
• Parts are not guaranteed against natural wear or deterioration resulting
from normal use.
• For maximum performance we highly recommend Shimano lubricants
and maintenance products.
• For any questions regarding methods of installation, adjustment,
maintenance or operation, please contact a professional bicycle dealer.
Technical Service Instructions
BB mount type front derailleur
(models without BB plate)
FD-M970-E / M770-E / M660-E / M665-E
Installation of the front derailleur
Install the front derailleur as shown in the illustration.
<Connecting and securing the inner cable>
Use an 8 mm spanner to tighten the wire
fixing bolt.
SI-0072A-001
Be sure to read the service instructions for the front derailleur and the Front Drive System in conjunction with
these service instructions.
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Please note: specifications are subject to change for improvement without notice. (English) © Apr. 2008 by Shimano Inc. XBC SZK Printed in Japan.
Bottom bracket mount
Bracket
< Normal type >
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
Bottom bracket mount fixing bolt
Note: Shimano does not provide the bottom bracket
mount fixing bolts.
Example: When using an Allen key
Tightening torque :
5 - 7 N·m {44 - 60 in. lbs.}
< Top route type >
Note:
Pass the cable
through as shown
in the illustration.
Wire
fixing bolt
8 mm spanner
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Advertisement
