Power Supply; Adjusting The Sound - THOMSON RK200CD Operating Instructions Manual

POWER SUPPLY

USING HOUSE CURRENT
Before use, check that the rated voltage of your unit
matches your local voltage.
Note: Plug is used as the disconnect device.
The disconnect device shall remain readily
operable.
USING BATTERIES
Disconnect the AC power cord
from the AC inlet of the unit.
Battery power is cut
automatically by the cord
while it is connected.
battery door
TURN ON / OFF THE SYSTEM
Press the POWER button to turn the audio on.
To change the audio mode between RADIO, AUX ,TAPE and CD,
press the FUNCTION button while the power is on.
The audio mode is displayed.
Turn off the unit by pressing the POWER button.
" OFF " word will be shown on the display
and then resume the current time.
AUX. IN
An external (auxiliary) audio source (i.e., personal CD player
or MP3 player) can be connected to this unit and heard through
the speakers.
1) Plug one end of cable into the AUX IN socket on the unit.
2) Plug the other end of the cable into the Headphone or
Line Out socket of the external source.
3) Press the FUNCTION button to select AUX.
Continue to operate CD or MP3 player as usual.
Selections will be heard through the unit's speakers.
Unit will be automatically off after 4.5 hours without further operation.

ADJUSTING THE SOUND

TO ADJUST THE VOLUME
MIN.
VOLUME
POWER
MAX.
To AC socket
When the volume decrease, or the sound distorts,
replace all of the batteries with new ones.
Insert six UM-2
( size C ) batteries.
FUNCTION
AUX. IN
(Plug other end into external
source such as an MP3 player.)
GB 2
To AC outlet
LCD display
FUNCTION
LCD display