Table of Contents
Advertisement
Quick Links
Safety Information
For UK Only
EN
CONNECT THE MAIN LEAD INTO A MAINS
POWER SOCKET
POWER SUPPLY 230V. It must not be
connected to D.C. mains.
Note: The mains lead of the set is fitted with a
moulded plug. If the mains socket are not
compatible or if for any reason the plug is
removed please follow the directions below.
The moulded plug cannot be rewired and if
removed must be disposed of safely.
DO NOT under any circumstances plug the
severed plug into any mains socket as this could
result in electric shock.
Important: If the plug is removed, rewire the
new plug as follow:
The wires in the mains plug are coloured in
accordance to the following code:
BLUE = NEUTRAL/BROWN = LIVE
TM9235 EN
If the colours of the wires in the mains lead of
this apparatus may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
BLUE wire to the terminal coded N (Neutral) or
coloured black.
BROWN wire to the terminal coded L (Live) or
coloured red.
DO NOT make any connection to
the terminal in the plug which is
marked
by the letter E or by the earth
symbol or coloured green or
green and yellow.
2
A fused plug must be
fitted with a 3A fuse
approved by ASTA or
BS1362 and fuse
covers must be
always be securely
replaced. If you set
does not work, the
fuse may be blown.
12/10/04, 10:32 AM
Advertisement
Table of Contents
Related Manuals for THOMSON Disc Player TM9235 EN
Summary of Contents for THOMSON Disc Player TM9235 EN
- Page 1 Safety Information For UK Only CONNECT THE MAIN LEAD INTO A MAINS POWER SOCKET POWER SUPPLY 230V. It must not be connected to D.C. mains. Note: The mains lead of the set is fitted with a moulded plug. If the mains socket are not compatible or if for any reason the plug is removed please follow the directions below.
-
Page 2: Safety Information
Safety Information CAUTION! Invisible laser radiation when open. Avoid exposure to beam. Class 1 laser product. This system must be opened only by qualified technicians to prevent accidents caused by the laser beam. LASER = 780 nm, P max = 5 mW Rating Information: At bottom/rear of the unit. -
Page 3: Important Information
Important Information Safety Precautions • Never open the cabinet under any circumstances. Any repairs or internal adjustments should be made only by a trained technician. • Never operate this product with the cabinet removed. • Do not use your System immediately after transporting it from a cold place to a warm place, as condensation may cause the system to malfunction. -
Page 4: Table Of Contents
Table of Contents Safety Information Important Information Table of Contents ... 1 Before You Begin ... 2 Useful advice ... 2 AC Power ... 2 Battery Power ... 3 Important Battery Information ... 3 What’s so special about this audio CD / mp3 disc player? ... -
Page 5: Before You Begin
Before You Begin Useful Advice • Do not use your system immediately after transporting it from a cold place to a warm place, as condensation may cause the system to malfunction. If moisture forms inside this system, it may not operate properly. To correct the problem, turn off the power and wait about 30 minutes for moisture to evaporate. -
Page 6: Battery Power
Before You Begin Battery Power You can insert 6 D-sized alkaline batteries (not supplied) and you can take your stereo just about anywhere. • Open the battery compartment door on the bottom of the unit by pressing down on the tab and pulling out the cover. -
Page 7: What's So Special About This Audio Cd / Mp3 Disc Player
Before You Begin What’s so special about this audio CD / mp3 disc player? Besides traditional audio CDs, this player is meant to play mp3 files encoded on a CD-ROM. You can store up to 12 hours of music on a single disc (at 128kbps). -
Page 8: General Controls
General Controls Main Unit FOLDER FOLDER RADIO Function Switch – selects OFF, RADIO RADIO or CD mode. PLAY/PAUSE - Plays and pauses CD and mp3 playback. SKIP BACKWARD - In CD/mp3 mode, goes back to the previous CD or mp3 track or searches backward. -
Page 9: Display
Display mp3 CD playback Random playback In CD playback mode In CD stop mode: - Normal audio CD - displays total track number - mp3 CD - displays folder and track numbers During playback: - Normal audio CD playback - displays CD play time - mp3 CD playback - displays current track number Sound Features Volume Control... -
Page 10: Radio
Radio Tuning to a station 1. Select RADIO with the RADIO function switch. 2. Slide the RADIO BAND switch to select between FM and MW band. 3. Rotate TUNING to select radio station. mp3 and CD Player Selecting CD Mode Select CD mode by sliding the function switch to CD. -
Page 11: Play And Pause
mp3 and CD Player Play and Pause 1. In stop mode, press PLAY/PAUSE begin CD / mp3 playback. icon is displayed. 2. During CD / mp3 playback, press PLAY/PAUSE to pause playback. Press again to resume. icon flashes in pause mode. Note: Note: Note:... -
Page 12: Program Playback
mp3 and CD Player Program playback Note: Note: Note: Note: Note: • The unit can program up to 20 tracks. • Folder program is not supported by this unit. 1. In CD mode, press PROG. to enter program mode. 2. Press PLAY/PAUSE to start program playback. -
Page 13: Mp3 File System
mp3 and CD Player mp3 File System • This unit adopts a 2-layer folder system, the root folder and all subfolders in a mp3 disc will be treated as independent folders. • Empty folders will not be shown when browsing through the disc, but it would still be counted as a folder in stop mode. -
Page 14: Troubleshooting Tips
Troubleshooting Tips Problem Solution • Unplug the unit for a moment, and then plug it back in. System doesn’t turn • Check the outlet by plugging in another device No sound • Adjust volume setting. • Make sure you’ve selected the correct function Poor radio •... -
Page 15: Maintenance
Maintenance Cleaning the exterior • Disconnect the system from AC power before cleaning the exterior of the unit with a soft dust cloth • Clean the exterior with a soft clean cloth or slightly moistened chamois leather. DO NOT use solvents as it may cause damage to the unit.