Axis Q6055-S Installation Manual page 10

AXIS Q6055-S PTZ Dome Network Camera
5. Leave the braided shield intact and fold back the braided shield.
6. Cut off about 7–8 mm (0.27–0.32 in) of the Ethernet wire foil shields.
7. Strip off about 4–5 mm (0.16–0.20 in) of the power wire jackets.
1 Multicable jacket
2
Braided shield
3
Ethernet wire foil shield (2x)
8. Connect the network and I/O wires to the internal network and I/O connectors. Open
the lid, insert the wires and close.
9. Connect the ground and power wires to the power connector (DC output).
10