Supplied Accessories; About Bluetooth; Preparing The Remote Control; Placement Of Speakers - Panasonic SC-AKX18 Operating Instructions Manual

Hide thumbs Also See for SC-AKX18:
Table of Contents

Advertisement

akx18ph_rqt9894-m_en Page 4 Monday, October 21, 2013 8:59 AM

Supplied accessories

Check and identify the supplied accessories.
1 AC power supply cord
1 AM loop antenna
1 FM indoor antenna
1 Remote control battery
1 Remote control
(N2QAYB000944)
For South America
1 Power plug adapter

About Bluetooth

Frequency band
• This system uses the 2.4 GHz frequency band.
Certification
• This system conforms to the frequency restrictions and
has received certification based on frequency laws.
Thus, a wireless permit is not necessary.
• The actions below are punishable by law:
– Taking apart or modifying the main unit.
– Removing specification indications.
Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
equipped devices is not guaranteed.
• All devices must conform to standards set by Bluetooth
SIG, Inc.
• Depending on the specifications and settings of a
device, it can fail to connect or some operations can be
different.
• This system supports Bluetooth
depending on the operating environment and/or
settings, this security is possibly not sufficient. Transmit
data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth
device.
Range of use
• Use this device at a maximum range of 10 m.
• The range can decrease depending on the
environment, obstacles or interference.
Interference from other devices
• This system may not function properly and troubles
such as noise and sound jumps may arise due to radio
wave interference if this unit is located too close to
devices or the devices that use the
other Bluetooth
®
2.4 GHz band.
• This system may not function properly if radio waves
from a nearby broadcasting station, etc. is too strong.
Intended usage
• This system is for normal, general use only.
• Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals, laboratories,
etc.).
4
Confidential
Until:
1 Jan 2014

Preparing the remote control

Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
®

Placement of speakers

®
The left and right speakers are the same.
You cannot remove the net of the speakers.
Use only the supplied speakers.
You can cause damage to the system and decrease the
sound quality if you use other speakers.
security features. But
®
Note:
• Keep your speakers more than 10 mm from the main
unit for ventilation.
®
• Put the speakers on a flat safe surface.
• These speakers do not have magnetic shielding. Do not
put them near TVs, PCs or other equipment easily
influenced by magnetism.
• When you play at high levels for a long period, it can
cause damage to the speakers and decrease the life of
the speakers.
• Decrease the volume in these conditions to prevent
damage:
– When the sound is distorted.
– When you adjust the sound quality.
CAUTION!
• Use the speakers only with the recommended
• Do the procedures included in these instructions
safety application draft 
system. If not, you can cause damage to the
amplifier and speakers and can cause a fire.
Consult an approved service personnel if damage
occurs or if there is a sudden apparent change in
performance.
when you attach the speakers.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents