Honeywell ADEMCO 5821 Installation And Setup Manual page 3

SPECIFICATIONS
Power: 3V lithium battery
(Duracell DL123A, Panasonic CR123A, Sanyo CR123A,
Varta CR123A)
CAUTION: Risk of fire, explosion, and burns. Do not
recharge, disassemble, heat above 212°F
(100°C) or incinerate. Dispose of used batteries
promptly. Keep away from children.
Operating Temperature: -10°C to +40°C
Operating Voltage:
Dimensions:
Sensor Parameters:
Cold Temperature
(Freeze) Detector
Warm Temperature
Detector
Hot Temperature
Detector
Refrigerator Failure
Detector
Freezer Failure
Detector
Flood Sensor
3.2VDC
3.1" length, 1.6"wide, 1.0"
depth
45°F
75°F
95°F
42°F
10°F
50K Ohms
TO THE INSTALLER
The mechanism may be subject to reduced sensitivity over time.
Annual testing of the operation is recommended.
Regular maintenance and inspection (at least annually) by the
installer and frequent testing by the user are vital to continuous
satisfactory operation of any alarm system.
The installer should assume the responsibility of developing and
offering a regular maintenance program to the user as well as
acquainting the user with the proper operation and limitations of
the alarm system and its components parts. Recommendations
must be included for a specific program of frequent testing (at least
weekly) to ensure the system's proper operation at all times.
FCC ID: CFS8DL5821
This device complies with Part 15 of FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
CANADA: 1748A-5821
REFER TO THE INSTALLATION AND SETUP GUIDE FOR THE
CONTROL PANEL WITH WHICH THIS DEVICE IS USED FOR
WARRANTY INFORMATION AND LIMITATIONS OF THE
ENTIRE ALARM SYSTEM.
3
FCC NOTICE
C US
R