The External Monitor Remains Blank; The External Monitor Is Blank Or The Image Is Unstable - Fujitsu STYLISTIC Q507 Operating Manual

Troubleshooting and tips

The external monitor remains blank

Monitor
Cause
Monitor is switched off.
Power saving has been activated (monitor is
blank).
Brightness is set to dark.
Screen output is set to the Tablet PC
touchscreen.
The external monitor's AC cable or data cable is
not connected properly.

The external monitor is blank or the image is unstable

Monitor Monitor
Cause
The wrong external monitor has been selected
or the wrong screen resolution has been set for
the application program.
70
Troubleshooting
► Switch the external monitor on.
► Press a key (external keyboard) or tap on
the touchscreen.
► Adjust the brightness of the monitor.
► Check whether the graphics driver settings
are correct or whether an external monitor
has been detected in "Intel Graphics Media
Accelerator Driver for mobile".
► Switch off the Tablet PC and the external
monitor.
or
► A forced shutdown (reset) button is
located on the left side of the system
located next to the USB port. To achieve
the same effect as removing the battery,
press the reset button.
► Check whether the AC cable is plugged
properly into the external monitor and into
the power outlet.
► Check that the data cable is properly
connected to the Tablet PC and the external
monitor (if it is plugged in with a connector).
► Switch on the external monitor and the
Tablet PC.
Troubleshooting
► Shut down the application program in
Windows. If the error persists after shutting
down the program, use the key combination
for switching the screen output in order to
switch to the touchscreen of the Tablet PC.
Change the following setting:
► Set the screen resolution: Set the screen
resolution as described in the documentation
for your operating system.
► Select monitor: Select monitor 1 or 2 as
described in the documentation for your
operating system.
Fujitsu