Setting Up The Dock; Connecting The Ac Adapter To The Dock - Fujitsu LIFEBOOK U747 Operating Manual

Your USB Type-C dock (optional)

Setting up the dock

Select a suitable location for the dock before setting it up. In doing
so, please follow these instructions:
• Never place the dock on a soft surface (e.g. carpeting, upholstered furniture, bed). This
can block the air vents of the notebook and cause overheating and damage.
• Place the dock on a stable, flat and anti-slip surface. Please note that the
rubber feet may mark certain types of surfaces.
• Never place the dock and the AC adapter on a heat-sensitive surface.
• Do not expose the dock to extreme environmental conditions.
Protect the dock from dust, humidity and heat.

Connecting the AC adapter to the dock

3
1
When the notebook is connected to a dock, the operating system creates a
hardware profile for the "Docked" mode. In this profile, for example, the monitor
which was last used for output is saved as a setting. This profile will be loaded
as soon as the notebook is connected to a dock of the same type.
56
► Connect the AC cable to the AC adapter (1).
► Plug the AC cable into the power outlet (2).
► Connect the AC adapter cable to the DC
jack (DC IN) of the dock (3).
2
Fujitsu