Asus PRIME J3355I-C User Manual page 11

M.2 socket 3
These sockets allow you to install M.2 (NGFF) SSD modules.
This socket supports E Key and type 2230 Wi-Fi/BT devices.
DDR3 DIMM slots
Install 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR3 DIMMs into these DIMM
sockets.
For more details, refer to System memory.
Panel voltage selection header (VCC_PWR_SEL)
VCC_PWR_SEL
1 2
+3V
(Default)
System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
Backlight inverter voltage selection header (3-pin BLKT_PWR_SEL)
BLKT_PWR_SEL
1 2
+12V
(Default)
LCD panel backlight header (8-pin LCD_BLKT_PANEL)
This connector is for the LCD panel backlight and brightness controls. It enables
the LCD panel backlight, provides backlight control signals, and provides brightness
control signals for the brightness button on the front panel.
Intel Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~2)
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA
6.0 Gb/s signal cables.
LVDS connector (40-pin LVDS)
This connector is for an LCD monitor that supports Low-voltage Differential
Signaling (LVDS) interface.
ASUS PRIME J3355I-C
2 3
1-2 (Default)
+5V
Pins
2 3
1-2 (Default)
2-3
+5V
Pins Setting
+3V
2-3 +5V
Setting
+12V
+5V
M.2(SOCKET3)
1-3