Change Password - ZTE-J G682 User Manual

Once you get a new phone, it‟s recommended to modify the password to
guarantee the safety of information.

Change Password

1. Enter old password;
2. Enter new password;
3. Enter new password again;
4. Press OK .
Note
Require PIN
When it is set "On", the phone requires PIN code of UIM card as
powering on. Enter correct PIN code to unlock the phone.
Chang PIN
1. Enter old PIN code;
2. Enter new PIN code;
3. Enter new PIN code again;
4. Press OK .
Note
If your phone needs UIM card, please read the
following contents; otherwise please skip this
section.
The UIM card will be locked if you enter wrong PIN
code three times. Then you need PUK code to
unlock the UIM card. The PIN code and PUK code
may be provided together with the UIM card. If not,
contact your network service provider. The default
PIN code is normally 1234. Please replace it with
your own PIN code as soon as possible.
ZTE-J G682 Digital Trunking Phone
75