Call Attribute; Private Call Forwarding - ZTE-J G682 User Manual

Call Attribute

After "Call Attribute" is set, the PTT call made by the phone will be
Ordinary PTT call or Pre-emptive Priority PTT call, and the
corresponding icon will display in the status bar of the standby screen.
Setting Method
1. Press PTT Functions to select Call Attribute ;
 
2. Press /
3. Press Save.
Note

Private Call Forwarding

After "Private Call Fwd." is activated, you could forward all incoming PTT
private calls to the number you set. You could perform the corresponding
settings in the phone.
Note
Setting Method
1. Press PTT Functions to select Supplement Svc , and then select
Private Call Fwd. ;
▲ ▼
2. Press / key to select All Calls , Busy , or Off-Service ;
3. Press Select to enter, and press
select On , then you need to enter a forward number;
key to select Normal or Pre-emptive ;
Please refer to section "Quickly Change Call
Attribute in Idle Mode" for details on call attribute
setting shortcut.
The forwarding number you set must be a PTT call
number.
ZTE-J G682 Digital Trunking Phone
▲ ▼
/ key to select On, or Off; if you
49