Smart Ring - ZTE-J G682 User Manual

ZTE-J G682 Digital Trunking Phone
b) SMS Alert: Press
c) PTT Voice: Press
d) Volume: Press
e) Alert: Press
▲ ▼
/
minute , press
press Save to save the setting.
Note

Smart Ring

You could set smart ring for up to five special incoming call numbers.
1. Enter Profiles , and press
2. Press Select to enter, press
press Select again to set;
64
▲ ▼
/ key to select SMS Alert . The operation is
the same as Ringtone / vib .
▲ ▼
key to select PTT Voice , press OK to enter,
/
 
press
/
Earpiece , and finally press Save to save the setting.
▲ ▼
key to select Volume , press OK to enter,
/
▲ ▼
press key to select the type Ringer , Earpiece ,
/
Key tone or SMS alert , press
volume, and finally press Save to save the setting.
▲ ▼
key to select Alert , press OK to enter, press
/
key to select Call Connected , Call Ended , or 1

/
If you select PTT voice from [ Earpiece ], the phone
will prompt with vibration when receiving PTT calls.
The incoming call ringtone is just for ordinary
numbers. For those numbers in the groups of the
phone book, the incoming call ringtone is the group
ringtone you set in [ Book ].
▲ ▼
/
key to select PTT voice from Speaker or


key to select On / Off, and finally
key to select Smart Ring ;
▲ ▼
key to select one number, and
/

key to adjust the
/