Power On/Off; Power On - ZTE-J G682 User Manual

ZTE-J G682 Digital Trunking Phone
3. Please power off your phone to remove the charger and battery
before taking out UIM card as shown in the figure below:

Power on/off

Power on

Press and hold until you see power-on animation on the screen.
If your phone supports UIM card and no UIM card is inserted, then your
phone will prompt with "UIM card not detected" At this point, you need to
power off your phone to reinsert a valid UIM card, and then power on.
If your phone supports UIM card and the PIN code of UIM card is set,
your mobile phone requires inputting PIN code when powered on. Enter
correct PIN code, and press left soft key to confirm.
22