How To Select The Pedal Assist Level (Pas); How To Use 7 Speed Shifter; Throttle On Demand; How To Disengage The Motor - Flash FLASHV1 User Manual

How to select the Pedal Assist Level (PAS)

1. First turn your bike to the On state.
2. Press the + button on the left side of your handlebar to
select 0,1, 2, 3, or 4 PAS levels.
3. Press the - button on the left side of your handlebar to
select 4, 3, 2, 1, or 0 PAS levels.

How to use 7 speed shifter

Note: you must pedal in order to use your mechanical
shifter.
1. To climb a hill, use your right thumb to shift from gear
7 to 1.
2. To ride faster, press the + sign with your right thumb
to reach up to the 7th gear.

Throttle on Demand

To use the throttle make sure your bike is in the On state and
PAS is between 1-4. Then twist the throttle back with your
right hand as show in the image below.

How to disengage the motor

To disengage the motor pull back on either the left or right
side of the brake lever. This will cut off the power to the mo-
tor. Letting go the throttle will also disengage the motor.
10
It's easy: how to videos at http://support.flashbike.io