Riding Flash; How To Turn Your Bike On And Start Riding; How To Turn The Bike Off; How To Arm The Bike - Flash FLASHV1 User Manual

How to turn the bike on for the very first time
Once your bike is fully charged tap the touchscreen with
your finger to turn on the TFT screen. The Flash logo will ap-
pear on the screen. Note: make sure the bike is fully charged
and the charger plug is removed from the bike's charge port.

How to turn your bike On and start riding

1. Tap the touch screen with your finger to turn on the TFT
screen and the Flash logo will appear on the screen.
2. Enter your unique 5-digit security PIN code to unlock
and turn on Flash. If your bike is armed use this same
PIN code to disarm the bike. Note: if you did not create
a unique PIN code during the profile setup process on
your Flash smartphone APP, you can enter the factory
default PIN code 11111.
3. The screen will then show 0 mph and Pedal Assist Level
0. If your bike is armed you will need to enter your
5-digit security code by touching the numbers on the
TFT screen. If you entered your security code incorrectly

Riding Flash

you will have 4 more tries before the bike is locked and
unable to turn on. If this happens you will need to unlock
the bike with your APP. Please contact Flash support if
you encounter any issues.

How to turn the bike off

Swipe the touch screen from the right edge of the screen to
the left edge of the screen. Then touch the OFF button to
turn the bike to its OFF state. The motor will be turned off in
this state. The throttle and PAS will not work in this state. All
electrical features such as the lights and horn and motor will
be turned off in this state. You can continue to ride the bike
like any traditional bike in the OFF state.

How to Arm the bike

1. To ARM the bike you will need to turn on the TFT by
touching or swiping the screen.
2. Then select by touching Off & Arm button. Your bike is
now in the Armed mode. You can track the status of your
8
It's easy: how to videos at http://support.flashbike.io