Table of Contents
Advertisement
To assign a photo to a contact:
1. On the Home screen, press the Start soft key and select Photo ID.
The contact list appears on the screen. Default photo IDs are assigned to all contacts
unless you change the settings.
2. Scroll to the desired contact entry.
3. To assign a photo for the contact, do one of the following:
To select from the existing photos, press the Menu soft key, and select Edit
Photo. Scroll to select the desired photo.
If you want to immediately take a photo to be assigned to the selected contact, press
the Camera soft key. Frame your target in the viewing window, and press the Shutter
soft key to take the photo. Press the Save soft key.
| N O T E }
You can also assign a photo after opening the contact card. (See "Editing a
Contact" later in this chapter.)
For detailed information on taking a photo, see section 9.1.
Assign
149
Advertisement
Table of Contents
