Table of Contents
Advertisement
6. Press the Menu soft key and select Activate. Notice not to press any key to leave the
current screen.
7. Connect your Smartphone to the desktop computer, and insert the Companion CD into the
CD-ROM drive of the desktop computer.
8. The installation of the USB driver will start automatically. If needed, browse for the USB
driver on the Companion CD.
9. Open the Device Manager on the desktop computer by clicking Start
System
Hardware (for Windows 2000/XP/2003)
10. Open the Modem item, right-click on Mio DigiWalker SmartPhone USB Modem, and
select Properties.
11. Open the Advanced page, enter +CGDCONT=1,"IP","MMS" under Extra
initialization commands, and click OK.
| N O T E }
Depending on your service provider, the string for you to enter may not be
"MMS." To make sure of the correct string to enter, on the Home screen press
the Start soft key
Edit Connections
the Menu soft key
12. On your desktop computer, create a dial-up connection using your Smartphone as the
modem, enter *99# for the phone number and user name; you do not need to set up the
password.
| N O T E }
For information on creating a dial-up connection on the desktop computer, see
the documents that came with the operating system.
You are advised to set the baud rate to at least 115200.
13. Click Dial on your dial-up connection screen. The
the successful dial-up connection.
14. To end the connection, right-click on the
Disconnect. Or, press the right soft key on the Smartphone
Settings
Data Connections
GPRS Connections
select your GPRS connection
Edit
Access point.
icon on the desktop computer and select
Control Panel
Device Manager.
the Menu soft key
icon appears on the task bar after
Deactivate.
125
Advertisement
Table of Contents
