Thorough Cleaning - Silvercrest SRR 3.7 B2 Operating Instructions Manual

Thorough cleaning

For a more thorough cleaning, remove the shaving heads:
1) Press the release button
2) Overstretch the cutting unit
and off.
3) Press the black gear wheel down slightly and turn it carefully
anticlockwise until the shaving head holder can be lifted out
(see Figure 1).
4) Clean all parts under running water and then allow them to dry
fully.
│ GB │ IE │ NI
■ 14
Figure 1
. The cutting unit
a little so it can be pulled upwards
pops up.
SRR 3.7 B2