Thorough Cleaning - Silvercrest SRR 3.7 D5 Operating Instructions Manual

Thorough cleaning

For a thorough cleaning, remove the shaving heads 3:
1) Pull the cutting unit 2 off the handset and turn it around.
2) Press the two catches on one of the black shaving head fi xtures and,
at the same time, pull this up and out of the cutting unit 2. Proceed
in the same way with the other two shaving head fi xtures. You
can now disassemble all of the parts (blade, shaving head 3).
3) Clean all parts under running water and then allow them to dry
fully.
4) Replace the cutting unit 2. Ensure that all of the parts grip into
each other correctly:
SRR 3.7 D5
Shaving head
fi xture
Blade
Shaving
head 3
GB │ IE │ NI │
17 ■